CompTIA^® Network+ Lab Exercise : Configure WPA on a Wireless Access Point

7. Configure WPA on a Wireless Access Point

Your task is to configure WPA on AP1 with a password "cert1" . Also verify that the SSID is set to "CertExams".

Instructions:

1. Open AP1 properties by clicking on the icon. Click Wireless tab and in Basic Wireless Settings enter Network Name(SSID) as "CertExams" , click Wireless Security tab and select WPA2 - PSK from Security Mode drop down and enter "cert1" as password and click "Save Settings" button.

Network+ Lab Exercises Contents

• Lab Exercises
  • 1. Arrange the color codes used in the TIA/EIA 568A wiring standard
  • 2. Identify the netstat command from the following output
  • 3. Configuring IP address, subnet mask, default gateway statically on a Windows client
  • 4. Configuring a DHCP server for offering DHCP parameters to a DHCP client computer
  • 5. Troubleshooting PC-to-PC communication
  • 6. Configuring WPA2 on client computers in wireless network environment
  • 7. Configure WPA on a Wireless Access Point
  • 8. Configuring Loopback Interface
  • 9. Connectivity test with Traceroute
  • 10. Design a Home Network with a Router, Access Point, and Wireless Work Stations